Minibus

From Wikipedia, the free encyclopedia

Toyota Coaster LPG green public minibus in Hong Kong
Citroën Jumper minibus in France
Cacciamali Urby (built on Iveco Daily chassis) operating in Zagreb, Croatia
Minibus vehicle from Suzuki Carry used as public transportation in Indonesia

A minibus, microbus, or minicoach is a passenger-carrying motor vehicle that is designed to carry more people than a multi-purpose vehicle or minivan, but fewer people than a full-size bus. In the United Kingdom, the word "minibus" is used to describe any full-sized passenger-carrying van or panel truck. Minibuses have a seating capacity of between 12 and 30. Larger minibuses may be called midibuses. Minibuses are typically front engine step-in vehicles, although low floor minibuses are particularly common in Japan.

History[edit]

It is unknown when the first minibus vehicle was developed. For example, Ford Model T vehicles were modified for passenger transport by early bus companies and entrepreneurs.[1] Ford produced a version during the 1920s to carry up to 12 people.[2][3][4]

Usage[edit]

Minibuses are used for a variety of reasons. In a public transport role, they can be used as fixed route transit buses, airport buses, flexible demand responsive transport vehicles, share taxis or large taxicabs. Accessible minibuses can also be used for paratransit type services, by local authorities, transit operators, hospitals or charities. Private uses of minibuses can include corporate transport, charter buses, tour buses. Schools, sports clubs, community groups and charities may also use minibuses for private transport. Individual owners may use reduced seating minibuses as cheap recreational vehicles.

Types[edit]

By size, microbuses are minibuses smaller than 8 metres (26 ftin) long. Midibuses are minibuses bigger than microbuses but smaller than full-size buses.

There are many different types and configurations of minibuses, due to historical and local differences, and usage. Minibus designs can be classified in three main groups, with a general increase in seating capacity with each type:

  • Van conversions. Simple, optional extras
  • Body builds
  • Purpose-built

Van conversions[edit]

Ford Transit minibus in County Down, Northern Ireland
Mercedes-Benz Sprinter minibus in Germany
Plaxton Beaver 2 bodied Mercedes-Benz Vario in Norwich, UK

The most basic source of minibuses is the van conversion, where the minibus is derived by modifying the existing van design. Conversions may be produced completely by the van manufacturer, sold as part of their standard model line-up, or be produced by specialist conversion companies, who source a suitably prepared base model from the van manufacturer for final completion as a minibus.

Van conversions involve adding windows to the bodywork, and seating to the cargo area. Van conversion minibuses outwardly look the same shape as the parent van, and the driver and front passenger cabin remains unchanged, retaining the driver and passenger doors. Access to the former cargo area for passengers is through the standard van side sliding door, or the rear doors. These may be fitted with step equipment to make boarding easier. Optional extras to van converted minibuses can include the addition of a rollsign for transit work, and/or a full-height walk-in door, for passenger access to the former cargo area. For public transport use, this door may be an automatic concertina type. For other uses, this may be a simple plug style coach door. Depending on the relevant legislation, conversions may also involve wheelchair lifts and tachograph equipment. A van conversion with a passenger area in the front and a storage area in the back, behind a fixed bulkhead, is called a splitter bus.

Examples of vans used for these conversion minibuses are:

Body builds[edit]

North American School minibus based on a Chevrolet Express van chassis. Body is a Blue Bird Micro Bird MB-II by Girardin

Another method of building a minibus is for a second stage manufacturer to build a specific body for fitting to a semi-completed van or light truck chassis. These allow a higher seating capacity than a simple van conversion. Often, the second stage manufacturer is a bus manufacturer.

In a body-on-chassis minibus, a cabin body is installed on a van or light truck chassis encompassing the drivers area. These designs may retain some outward signs of the original van, such as the hood and grill. Other designs are visually a complete bus design, and it is merely the chassis underneath that is from the van design.

The body-on-chassis approach gives the advantage of higher seating capacity, or more room for passenger comfort, through a larger cabin area. There is also the advantage of being able to have the drivers seat positioned in a small cubicle, next to the main passenger entrance, allowing the driver to collect fares in a transit bus role.

Examples of body built minibuses are:

Examples of vehicles used for this type of minibuses are:

Purpose built[edit]

Nissan Civilian purpose built minibus

A next generation approach to the van-derived or cutaway chassis approach, is for manufacturers to produce an integral design, where the whole vehicle is purposely designed and built for use as a minibus. This is usually done by an integral bus manufacturer, although large automotive groups also produce their own models. These designs are often available in long high capacity versions, and may attract different designations, such as midibus, or light bus.

Examples of purpose built minibuses are:

Low floor minibuses[edit]

Hino Poncho rear-engined low-floor minibus

Following the development of low-floor technology, some low-floor purpose built minibuses have been created. Some offer a low floor access through a centre door. Some short versions of low floor midibuses are sometimes also called minibuses.

Regional variants[edit]

There are many different form of public transportation services around the world that are provided by using vehicles that can be considered as minibus:

Driving licence[edit]

Some countries may require an additional class of driving licence over a normal private car licence, and some may require a full commercial driving licence. The need for such a licence may depend on:

In the UK the following information regarding Minibus driving licences is important: "The holder of an ordinary car driving licence which was obtained prior to January 1997, once aged 21 years minimum, may drive a Minibus with a capacity of 16 passengers. Where the "ordinary car driving licence" is obtained after December 1996, they will have to take a separate test to drive a vehicle with a capacity of more than 8 passengers. However, there is an exemption for certain volunteer drivers, where the vehicle does not exceed 3500 kg GVW (or 4250 kg GVW if the vehicle is designed to be wheelchair accessible). Driving licence source

A driving licence issued in Ontario, Canada, for an equivalent of a UK class B or class B-auto driving licence (in the case of Ontario, a class G licence), allows its holder to drive vehicles with:

Anyone wanting to drive a vehicle in Ontario, with the same MAM limits as for class G vehicles, with fewer than 25, but at least 10, passenger seats, must obtain a bus licence. This licence will allow, for example, its holder to drive 12- and 15-passenger vans that Transport Canada defines as large passenger vans.

Gallery[edit]

See also[edit]

References[edit]

  1. ^ Negyesi, Pal (4 May 2020). "The Role of the Ford Model T As a Bus in Central and Eastern Europe". CEAutoClassic. Retrieved 17 February 2023.
  2. ^ "Henry the Model T Bus". highfieldspioneervillage.com.au. Retrieved 17 February 2023.
  3. ^ "1926 Ford Model TT 10 Seater Country Bus Chassis no. 14390021 Engine no. 14390021". bonhams.com. Retrieved 17 February 2023.
  4. ^ "Car Ford Model T Station Bus 1919 for sale - PreWarCar". prewarcar.com. Retrieved 17 February 2023.